VXL Products

The basic functions of the ring travellers are to lay yarn on the bobbin under the proper tension, control the ballooning of the yarn, work together with rotating bobbin and front roller delivery to insert twist into the yarn, and act as a differential for the surface speed of the yarn as it varies during formation of the package.

Travellers with an additional finish show the following advantages:

1. Ultimate (Blue)

Ultimate travellers are specially surface treated by diffusion technique to impart deepened effect for

• Diffusion treatment
• Excellent Heat Dissipation
• Extreme wear – Resistance
• Low Thread Breakage
• Reduced Hairiness
• Better elongation for easy insertion
• Running in of rings
• Increasing the Ring’s Life

A nickel coating is applied with a special process.

• Long life
• Less traveller Burn-out
• More Gliding Properties
• Good heat dissipiation

A Special surface treatment with Gold finish

• Total surface treatment
• Better heat dissipiation
• Lesser yarn breakage rate
• Especially for synthetics

A technological innovation for

• Lesser heat generation
• Longer life
• Less Breakage rate
• Reduced Hairiness
• Ra Value 0.04
• Traveller speed 160 km/hr
• Better Anti Corrosion properties

• Half Flange –width 2.6mm
• One Flange –width 3.2 mm
• Two Flange –width 4.0mm

• Adopter Type
• Circlip Type
• Screw Type
• Fixing Type

• Normal profile
• Anti wedge profile
• CR profile

• Blackjet
• Starjet

• Ball bearing steel
• Blackdised Ring
• Hardness 850 HV
• Ra Value 0.08 to 0.1
• Running-in required
• Suitable for Finer Counts
• Available in Adopter, Circlip and Screw type

• Steel 100cr6 (Ball bearing steel)
• Hardness – 850 HV – inner core
  1. 300 HV – outer core
  2. 1150 HV – total
• Special chrome Coated
• Available only in adopter type
• Ra Value 0.04 to 0.06
• Ovality 0.1%
• Short Running-in
• Higher Speeds
• Coating thickness 25 Microns
• Lower Yarn breakage Rate
• Lesser Hairiness